Datasheet — 4CH 10A Curtain Actuator
Manufacturer document, in English · 0.4 MB

ReferenceHDL-M/W04.10.1
Controls 4 curtain or blind motors (up, down, stop), 10 A per channel, with manual operation.
The KNX 4CH 10A Curtain Actuator is in full compliance with Chinese and European safety standards and the KNX protocol. This series of products is characterized by high power (10 A), low consumption and high reliability.
Design, cabling, ETS programming and hand-over: everything is included in our quote.
Our home-automation tradeValues provided by the manufacturer; the datasheet prevails.
| Working voltage | 21–30 V DC |
|---|---|
| Working current | 12 mA / 30 V DC |
| Input voltage | 120 V / 240 V AC (50/60 Hz) |
| Output channel | 4 channels, 10 A |
| Communication | KNX |
| Output terminals | Line in, line out cable for each channel: 2.5–4 mm² |
| Cable diameter of KNX terminal | 0.6–0.8 mm |
| Electrical life time | > 100 000 |
| Mechanical life time | > 100 000 |
| Working temperature | -5 °C à 45 °C |
|---|---|
| Working relative humidity | ≤ 90 % |
| Storage temperature | -20 °C à 60 °C |
| Storage relative humidity | ≤ 93 % |
| Dimensions | 144 × 90 × 64 mm |
|---|---|
| Net weight | 362 g |
| Shell material | Nylon (PA66) |
| Installation | 35 mm DIN rail |
| Protection rating (EN 60529) | IP20 |
Manufacturer document, in English · 0.4 MB
A technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.