Free site visit · quote within 24 h 0782 00 00 36WhatsApp Service requestLarge projects: SSP Services ↗
SSP Domotics Free site visit
  1. Home
  2. Products
  3. HDL
  4. Controllers & actuators
  5. KNX 4CH 7A RGBW Driver
KNX 4CH 7A RGBW Driver
HDL · KNX · Controllers & actuators

KNX 4CH 7A RGBW Driver

ReferenceM/DRGBW4.1

4-channel RGBW LED driver, 7 A per channel, with linear PWM dimming, scenes and sequences.

  • Installed and programmed by our KNX-certified technicians
  • Warranty up to 5 years, equipment and installation
  • Price on quotation, after the free visit
Overview

The KNX 4CH 7A RGBW Driver has 4 RGBW driving channels, and each channel has an output capacity of 7 A. The four channels can be controlled separately or using RGBW combination control. PWM linear dimming allows setting the dimming response time and the upper and lower dimming limits. The dimming is stable and diversified to meet the needs of different occasions.

Brand
HDL
Family
Controllers & actuators
Manufacturer reference
M/DRGBW4.1
Protocol
KNX

We install it for you

Design, cabling, ETS programming and hand-over: everything is included in our quote.

Our home-automation trade
Key features

What this product brings

  • PWM linear dimming
  • Dimming lower/upper limit setting
  • Dimming fade time setting
  • 1 bit switch state response
  • 1 byte brightness state response
  • 3 bytes RGB color response (RGBW combination mode only)
  • State recovery after power on
  • Staircase light
  • Flashing light
  • Scene function (10 scenes supported for each channel)
  • Logic function
  • Threshold value
  • Up to 5 sequences, with 24 steps for each
  • Custom on/off (RGBW combination mode only)
  • Color selection and transformation for combination mode (RGBW combination mode only)
  • DC power supply polarity protection prevents the device from being destroyed if the positive and negative poles are connected in reverse
Technical

Technical specifications

Values provided by the manufacturer; the datasheet prevails.

Basic parameters

Working voltage21–30 V DC
Working current10 mA/30 V DC
CommunicationKNX/EIB
Output typeConstant voltage PWM output
Output channelR, G, B, W: 4 channels
Output current7 A/CH (total 28 A)
LED typeCommon anode RGBW LED strip or single LED
Cable diameter of KNX terminal0.6–0.8 mm
Input power (for LED)12–60 V DC

External environment

Working temperature-5 °C à 45 °C
Working relative humidity≤ 90 %
Storage temperature-20 °C à 60 °C
Storage relative humidity≤ 93 %

Specifications

Dimensions183 × 84 × 39 mm
Net weight212 g
Shell materialABS, PC, aluminum
InstallationScrew installation
Protection rating (EN 60529)IP20
Documents

Datasheet to download

PDF

Datasheet — KNX 4CH 7A RGBW Driver

Manufacturer document, in English · 0.3 MB

Download
Free site visit

Interested in this product?

A technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.