Datasheet — KNX Inkslab Series Panel Power Interface with Auxiliary Power Supply EU
Manufacturer document, in English · 1.7 MB

ReferenceMPFPIY-2PF-KT.18
EU-format power base for Inkslab smart panels, with an auxiliary power supply input.
This base communicates and operates via the HDL KNX protocol. Designed for Yan-series KNX smart panels, it delivers operating voltage and communication signals to the panels.
It supports relay circuit on/off control through device ID addressing, and acts as the power interface for panels to enable intelligent control of household lighting, curtains, fans, sockets and other electrical loads.
Design, cabling, ETS programming and hand-over: everything is included in our quote.
Our home-automation tradeValues provided by the manufacturer; the datasheet prevails.
| Dimensions (W × H × D) | 81.8 × 81.8 × 24.7 mm |
|---|---|
| Net weight | 71,6 g |
| Shell material | PC |
| Installation | Switch box installation |
| Protection rating (EN 60529) | IP20 |
Manufacturer document, in English · 1.7 MB

Power base for Inkslab smart panels with four 10 A relays to control lighting, curtains, fans and sockets.
View product
Power base for Inkslab smart panels with two 10 A relays to control lighting, curtains, fans and sockets.
View product
EU-format power base that supplies Inkslab smart panels and connects them to the bus.
View product
Wall panel with 6 mechanical buttons to control lights, curtains and scenes, with a built-in temperature sensor.
View productA technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.