Datasheet — KNX Line Coupler
Manufacturer document, in English · 0.4 MB

ReferenceM/LCR.1
Coupler that links and electrically isolates two KNX lines, filters telegrams to reduce traffic, or acts as a repeater.
The KNX Line Coupler can be used as a line coupler or repeater (for address extension). When working as a line coupler, it connects a main line and a sub line. A separate power supply including a choke is required for each new line segment, and each line is electrically isolated.
Through the line coupler, packet filtering is carried out between the two lines, reducing the amount of telegrams, preventing interference and maintaining efficient communication.
Design, cabling, ETS programming and hand-over: everything is included in our quote.
Our home-automation tradeValues provided by the manufacturer; the datasheet prevails.
| Working voltage | 21–30 V DC |
|---|---|
| Communication | KNX/EIB |
| Main line current | < 30 mA |
| Sub line current | 3 mA |
| Cable diameter of KNX terminal | 0.6–0.8 mm |
| Working temperature | -5 °C à 45 °C |
|---|---|
| Working relative humidity | ≤ 90 % |
| Storage temperature | -20 °C à 60 °C |
| Storage relative humidity | ≤ 93 % |
| Dimensions | 90 × 36 × 70 mm |
|---|---|
| Net weight | 68,4 g |
| Shell material | ABS |
| Installation | 35 mm DIN rail |
| Protection rating (EN 60529) | IP20 |
Manufacturer document, in English · 0.4 MB

Small module for two-way data exchange between the KNX bus and RS485 equipment.
View product
Interface linking a computer to the KNX bus to program, configure and diagnose devices with ETS.
View product
Router linking the IP network (LAN) to the KNX TP1 bus to exchange telegrams and program or monitor the installation with ETS.
View productA technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.