Datasheet — KNX Master/Slave Timer Controller
Manufacturer document, in English · 0.3 MB

ReferenceM/TM04.1
4-channel scheduler with real-time clock, usable as master or slave clock on the bus.
With 4 independent channels and a real-time clock, the KNX Master/Slave Timer Controller can run standard time as a master clock or a slave clock. The master clock cyclically sends the clock information to the KNX/EIB bus to control the schedule, while the slave clock synchronizes after receiving the master clock information and also controls the schedule.
Design, cabling, ETS programming and hand-over: everything is included in our quote.
Our home-automation tradeValues provided by the manufacturer; the datasheet prevails.
| Working voltage | 21–30 V DC |
|---|---|
| Working current | 10 mA / 30 V DC |
| Communication | KNX |
| Cable diameter of KNX terminal | 0.6–0.8 mm |
| Working temperature | -5 °C à 45 °C |
|---|---|
| Working relative humidity | ≤ 90 % |
| Storage temperature | -20 °C à 60 °C |
| Storage relative humidity | ≤ 93 % |
| Dimensions | 144 × 90 × 64 mm |
|---|---|
| Net weight | 240 g |
| Shell material | Nylon |
| Installation | 35 mm DIN rail |
| Protection rating (EN 60529) | IP20 |
Manufacturer document, in English · 0.3 MB

Controls air conditioning, fan, compressor and floor heating, with up to 7 digital temperature sensors.
View product
Power supply for the KNX/EIB bus delivering up to 960 mA, with overload and short-circuit protection.
View product
Small module for two-way data exchange between the KNX bus and RS485 equipment.
View productA technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.