Free site visit · quote within 24 h 0782 00 00 36WhatsApp Service requestLarge projects: SSP Services ↗
SSP Domotics Free site visit
  1. Home
  2. Products
  3. HDL
  4. Controllers & actuators
  5. KNX FCHC Actuator
KNX FCHC Actuator
HDL · KNX · Controllers & actuators

KNX FCHC Actuator

ReferenceM/FCHC.4.1

Controls air conditioning, fan, compressor and floor heating, with up to 7 digital temperature sensors.

  • Installed and programmed by our KNX-certified technicians
  • Warranty up to 5 years, equipment and installation
  • Price on quotation, after the free visit
Overview

The KNX FCHC Actuator uses KNX/EIB communication and controls air conditioners, fans, compressors and floor heating. Its functions are set via ETS software and it can work with different panels. Up to 7 digital temperature sensors can be connected.

Brand
HDL
Family
Controllers & actuators
Manufacturer reference
M/FCHC.4.1
Protocol
KNX

We install it for you

Design, cabling, ETS programming and hand-over: everything is included in our quote.

Our home-automation trade
Key features

What this product brings

  • Multiple control objects: HVAC, fan, compressor, floor heating, with one control mode per control target
  • Control modes: HVAC mode, fan mode, compressor mode and floor heating mode
  • Active and passive control for flexible use with different panels: in active mode, the module works with panels without PI algorithm such as HDL-M/DLP04.1; in passive mode, with panels that include an algorithm such as Siemens 5WG1
  • Local temperature detection and limit temperature alarm: when the local temperature is too high or too low, the module sends an alarm signal to the bus; it can connect to up to 7 temperature sensors
Technical

Technical specifications

Values provided by the manufacturer; the datasheet prevails.

Basic parameters

Working voltage21–30 V DC
Working current20 mA / 30 V DC
CommunicationKNX
Cable diameter of KNX terminal0.6–0.8 mm
Temperature sensorDigital temperature sensor (TS/C1.0)
Output current8 A (AC), 5 A (DC)

External environment

Working temperature-5 °C à 45 °C
Working relative humidity≤ 90 %
Storage temperature-20 °C à 60 °C
Storage relative humidity≤ 93 %

Technical

Dimensions90 × 72 × 64 mm
Net weight168 g
Shell materialFlame-retardant nylon
Installation35 mm DIN rail
Protection rating (EN 60529)IP20
Documents

Datasheet to download

PDF

Datasheet — KNX FCHC Actuator

Manufacturer document, in English · 0.3 MB

Download
Free site visit

Interested in this product?

A technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.