Free site visit · quote within 24 h 0782 00 00 36WhatsApp Service requestLarge projects: SSP Services ↗
SSP Domotics Free site visit
  1. Home
  2. Products
  3. HDL
  4. Controllers & actuators
  5. KNX HVAC Module
KNX HVAC Module
HDL · KNX · Controllers & actuators

KNX HVAC Module

ReferenceM/FCU01.10.1

Controls heating, cooling and fan speeds, with 7 floor heating zones and 5 relay outputs.

  • Installed and programmed by our KNX-certified technicians
  • Warranty up to 5 years, equipment and installation
  • Price on quotation, after the free visit
Overview

The KNX HVAC Module belongs to the HDL KNX/EIB series and controls heating, cooling and high/medium/low fan speed. 7 independent floor heating control channels can be set. Combined with a digital temperature sensor, the actuator achieves precise temperature control. In addition, 5 switch output channels and 2 DC 0-10V output channels can be set, for example for staircase lights.

Brand
HDL
Family
Controllers & actuators
Manufacturer reference
M/FCU01.10.1
Protocol
KNX

We install it for you

Design, cabling, ETS programming and hand-over: everything is included in our quote.

Our home-automation trade
Key features

What this product brings

  • 7 independent floor heating control channels
  • Up to 7 digital temperature sensors supported
  • 5 relay output channels
  • 2 DC 0-10V output channels (10 mA per channel)
  • Fan speeds: high, medium, low
  • Working modes: heating, cooling
  • Operation modes: comfort, standby, night, protection
  • Main functions: fan speed, valve status report, local 7-channel temperature sampling, local temperature report, operation time statistics, channel status response, power-on status recall, power-off status saving, staircase lights, on/off delay, protection delay, PWM control output
  • Active and passive control for flexible use with panels from different manufacturers: in active mode, with panels without PI algorithm, for example M/DLP04.1; in passive mode, with panels that include an algorithm, for example Siemens 5WG1
  • Online update
Technical

Technical specifications

Values provided by the manufacturer; the datasheet prevails.

Basic parameters

Working voltage21–30 V DC
Working current20 mA / 30 V DC
Input voltage120 V / 240 V AC (50/60 Hz)
CommunicationKNX
Detecting temperature range-30 °C à +100 °C
Temperature sensor2.5 m digital temperature sensor (TS/C 1.0)
Output terminalsLine in, line out cable for each channel: 2.5–4 mm²
Output channel5 channels, 10 A per channel
0-10V output2 channels, 10 mA per channel
Cable diameter of KNX terminal0.6–0.8 mm
Electrical life time> 100 000
Mechanical life time> 100 000

External environment

Working temperature-5 °C à 45 °C
Working relative humidity≤ 90 %
Storage temperature-20 °C à 60 °C
Storage relative humidity≤ 93 %

Technical

Dimensions90 × 72 × 64 mm
Net weight310 g
Shell materialFlame-retardant nylon
Installation35 mm DIN rail
Protection rating (EN 60529)IP20
Documents

Datasheet to download

PDF

Datasheet — KNX HVAC Module

Manufacturer document, in English · 0.4 MB

Download
Free site visit

Interested in this product?

A technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.