Datasheet — KNX Source 10
Manufacturer document, in English · 1.9 MB

Smart home control centre with a 10-inch touch screen and knob for lights, curtains, fresh air, music and scenes.
Source 10 is a smart home control center with a 10-inch capacitive control screen, achieving intelligent linkage control of the lights, curtains, fresh air, music, scenes, and so on through the knob and interactive interfaces.
Design, cabling, ETS programming and hand-over: everything is included in our quote.
Our home-automation tradeValues provided by the manufacturer; the datasheet prevails.
| Power consumption | ≤ 15 W |
|---|---|
| Input voltage | Zigbee interface: 100–240 V AC, 50/60 Hz; Buspro interface: 18–28 V DC; KNX interface: 21–30 V DC |
| KNX auxiliary voltage | 18–28 V DC |
| Output channel | Zigbee / Buspro / KNX interface: 2CH, 3 A/CH; resistive load: ≤ 660 W/CH; capacitive load: ≤ 200 W/CH |
| Communication protocol | HDL LINK, WiFi 2.4 GHz |
Manufacturer document, in English · 1.9 MB

Power base for Inkslab smart panels with four 10 A relays to control lighting, curtains, fans and sockets.
View product
Power base for Inkslab smart panels with two 10 A relays to control lighting, curtains, fans and sockets.
View product
EU-format power base for Inkslab smart panels, with an auxiliary power supply input.
View product
EU-format power base that supplies Inkslab smart panels and connects them to the bus.
View productA technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.