Datasheet — Power Interface with 2CH 10A Relay
Manufacturer document, in English · 0.3 MB

ReferenceM/PTCI2P2R.1
Interface that powers the KNX Tile Display and carries its communication signals, with two built-in 10 A relays.
Power Interface with 2CH 10A Relay works in conjunction with KNX Tile Display and other panels, and provides working power and communication signals to the panel.
Design, cabling, ETS programming and hand-over: everything is included in our quote.
Our home-automation tradeValues provided by the manufacturer; the datasheet prevails.
| Working voltage | 21–30 V DC |
|---|---|
| Working current | 25 mA / 30 V DC |
| Auxiliary voltage | 20–30 V DC |
| Auxiliary current | 10 mA / 24 V DC |
| Input voltage | 100–240 V AC (50/60 Hz) |
| Output channel | 2CH, 10 A/CH |
| Communication | KNX |
| Cable diameter of KNX terminal | 0.6–0.8 mm |
| Working temperature | -5 °C à 45 °C |
|---|---|
| Working relative humidity | ≤ 90 % |
| Storage temperature | -20 °C à 60 °C |
| Storage relative humidity | ≤ 93 % |
| Dimensions | 81.4 × 81.4 × 32.4 mm |
|---|---|
| Net weight | 92 g |
| Shell material | Iron, PC |
| Installation | Switch box installation |
| Protection rating (EN 60529) | IP20 |
Manufacturer document, in English · 0.3 MB

Power base for Inkslab smart panels with four 10 A relays to control lighting, curtains, fans and sockets.
View product
Power base for Inkslab smart panels with two 10 A relays to control lighting, curtains, fans and sockets.
View product
EU-format power base for Inkslab smart panels, with an auxiliary power supply input.
View product
EU-format power base that supplies Inkslab smart panels and connects them to the bus.
View productA technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.